The full IT requirements document can be found below
IT Requirements
The ONVU Learning solution does not require any peripherals (e.g. mouse/keyboard/monitor) for setup. The only requirements for the system to run are a network connection and a power connection.
Note: It is recommended to place the gateway and power somewhere where it cannot be tampered with or accidentally unplugged.
Network Requirements
The ONVU Learning Solution requires an outbound connection to several AWS URLs.
To ensure your network is able to make this connection please run the Network Test Tool. Further instructions for this tool can be found Here
The ONVU Learning Gateway is configured by default to accept an IP address from DHCP. It is strongly recommended to create a static DHCP reservation on your network for the WAN MAC address on the label.
We recommend having a separate network or VLAN set up for the ONVU Learning Gateways where possible. More information about the suggested network setup can be found Here